Riverside County Metal Roofing
Standing Seam Metal Roofing in Temecula, CA
Temecula's wine country location delivers triple-digit summers and Santa Ana wind events that funnel through Temecula Gap. Standing seam metal handles both the heat stress and 80+ mph wind gusts.
50-70
Year lifespan
25%
Cooling savings
40+
Year finish warranty
50%
Savings vs. GC
Direct-Hire Installers
Why Temecula Homeowners Hire Us Directly
Most Temecula roofing contractors subcontract their metal roof work to specialty crews. We are that crew. When you hire The Metal Roof Pros, you get the same installers those contractors call, at wholesale pricing. No middleman. No markup. No project management fee.
Every standing seam panel we install in Temecula is cut to length on site, mechanically seamed with calibrated equipment, and backed by 15+ years of precision metal roofing experience across Riverside County.
About our crew
Installation Process
Standing Seam Installation in Temecula
Our Temecula standing seam installations start with a full deck inspection, synthetic underlayment, and precision clip layout. Each panel is roll-formed on site to the exact length of your roof run, eliminating end laps and potential leak points.
- On-site roll forming for exact-length panels
- Concealed clip system for thermal expansion
- Mechanical seaming with calibrated equipment
- Custom flashings fabricated for every penetration
Roof Replacement
Replacing Your Temecula Roof with Standing Seam Metal
Whether your current Temecula roof is asphalt shingles, concrete tile, clay tile, or wood shake, we handle the full tear-off and replacement. Our crew removes the old material, inspects the deck for damage, installs synthetic underlayment, and lays standing seam metal panels in a single continuous process.
Most Temecula residential re-roofs complete in 3 to 5 days depending on roof size and complexity. We coordinate dumpster delivery, haul-off, and final inspection scheduling so you do not have to manage the project.
Roof replacement guideClimate-Specific Engineering
Desert-Engineered Standing Seam for Temecula
Temecula temperatures routinely exceed 115 degrees with 60-degree daily swings. Standard roofing materials crack and fail under this thermal stress. Our standing seam panels ride on floating clips that absorb expansion and contraction without buckling, oil-canning, or fastener fatigue.
Standing Seam InstallationThe Direct-Hire Advantage
Why Temecula Homeowners Skip the General Contractor
General contractors mark up metal roofing 30 to 50% and subcontract the work to crews like ours. When you hire The Metal Roof Pros directly, you cut out the markup and get the actual installers.
15+ Years Focused on Metal
We do one thing: standing seam metal roofing. No siding. No gutters. No asphalt. That singular focus means every installation in Temecula gets expert-level precision.
Up to 50% Savings
Same crew, same materials, same craftsmanship. The only difference: you are not paying a general contractor to manage us. That markup goes back in your pocket.
B2B Expertise, Direct Access
We built our reputation installing for contractors across Riverside County. Now Temecula homeowners can hire us directly at the same wholesale rates.
Service Areas
Temecula Neighborhoods We Serve
We install standing seam metal roofing across all Temecula neighborhoods. Here are some of the areas where we work most frequently.
Also serving nearby:
Metal Roof vs. Asphalt Shingles in Temecula
Side-by-side performance comparison for Temecula's climate conditions.
| Feature | Standing Seam Metal | Asphalt Shingles |
|---|---|---|
| Lifespan | 50 to 70 years | 15 to 20 years |
| Fire Rating | Class A (non-combustible) | Class C typical |
| Wind Resistance | 150+ mph | 60 to 80 mph |
| Energy Efficiency | Reflects 70% solar | Absorbs 85 to 95% |
| Maintenance | Near zero | Ongoing repairs |
| Corrosion | Kynar 500 protected | Granule loss, curling |
| Cost per Year | Lower (longer life) | Higher (replace 3x) |
Metal Roofing Services in Temecula
Every service backed by 15+ years of standing seam metal roofing expertise.
Standing Seam Installation
New construction and full re-roof standing seam metal installations in Temecula. Concealed fasteners, floating clips, Kynar 500 finishes.
Learn moreMetal Roof Replacement
Complete tear-off and replacement of asphalt, tile, or wood shake roofs with standing seam metal in Temecula.
Learn moreColors and Finishes
83 Kynar 500 PVDF color options for Temecula homes. Matte, metallic, and custom-match finishes available.
Learn moreCommercial Metal Roofing
Standing seam and mechanically seamed systems for Temecula commercial, industrial, and multi-family properties.
Learn moreMetal Roofing Questions in Temecula
Answers specific to Temecula's climate, building codes, and roofing conditions.
Get a Free Metal Roofing Estimate in Temecula
Call now or request a free satellite estimate. We respond within one business day with a detailed scope and pricing for your Temecula project.
Reviews
What Our Clients Say
Susan M.
Calabasas, CA
The Metal Roof Pros installed a dark bronze standing seam on our home and it completely transformed the exterior. Their crew was detail-oriented and left the property spotless every day. The finished roof is a showpiece. We get compliments from neighbors constantly.
Michael T.
Thousand Oaks, CA
After getting five quotes from different companies, The Metal Roof Pros were the only team who could explain their gauge, clip spacing, and underlayment system in detail. Their knowledge of standing seam installation is unmatched. The roof looks and performs flawlessly.
Jennifer L.
Encino, CA
We hired The Metal Roof Pros for a charcoal gray Kynar 500 standing seam roof. Karen walked us through every color option and helped us choose the perfect shade to match our stone facade. The color is exactly what we wanted and the finish is stunning.
David R.
Malibu, CA
Living on the coast, we needed a roof that could handle salt air. The Metal Roof Pros recommended their aluminum standing seam system and explained exactly why steel would not work at our location. Two years later, zero corrosion issues. Worth every penny.
Patricia W.
Pacific Palisades, CA
After the 2024 wildfires, we prioritized fire protection for our rebuild. The Metal Roof Pros installed a Class A rated standing seam system with proper ember-resistant detailing at every penetration point. Our insurance company was very impressed with the fire rating documentation.
Robert K.
Agoura Hills, CA
We own a commercial property in Agoura Hills and needed a reliable roofing contractor. The Metal Roof Pros handled our 12,000 square foot standing seam installation on schedule and on budget. Their commercial crew was professional and incredibly efficient.
Maria G.
Sherman Oaks, CA
Karen and the entire Metal Roof Pros team made the process simple from estimate to final walkthrough. They installed seamless rain gutters to match our new metal roof and the integration between the two systems is perfect. Everything drains exactly where it should.
James H.
Beverly Hills, CA
We had The Metal Roof Pros install a 22-gauge standing seam on our hillside property. The heavier gauge was recommended for the wind exposure and steep pitch. The installation quality is exceptional. Every panel, clip, and flashing is precise.
Linda C.
Woodland Hills, CA
The attic ventilation work The Metal Roof Pros did alongside our standing seam installation made a huge difference in our cooling costs. They installed ridge vents and balanced the intake system properly. Our upstairs rooms are noticeably cooler in summer.
Carlos A.
Pasadena, CA
The Metal Roof Pros replaced our old tile roof with a matte black standing seam and it completely modernized our 1960s ranch home. The crew handled the tear-off and new installation in under a week. Clean work, great communication, outstanding result.
Sarah P.
Studio City, CA
We added new rain gutters when The Metal Roof Pros installed our standing seam roof. They color-matched the gutters to the roof panels perfectly. The seamless gutter system handles our heaviest rains without any overflow issues. Excellent craftsmanship throughout.
Thomas B.
Westlake Village, CA
As a retired general contractor, I am extremely particular about installation quality. The Metal Roof Pros exceeded my expectations. Their clip spacing, flashing details, and underlayment application were textbook perfect. This is how metal roofing should be done.
Angela D.
Brentwood, CA
We chose a slate blue Kynar 500 finish and it looks absolutely beautiful on our contemporary home. The Metal Roof Pros helped us visualize the color with actual panel samples before we committed. The 35-year paint warranty gave us total confidence in the investment.
Mark S.
Northridge, CA
Our commercial building needed a complete re-roof and The Metal Roof Pros delivered a standing seam system that solved our persistent leak problems. Their attention to flashing details around our HVAC units and skylights was impressive. No leaks since installation.
Diane F.
Topanga, CA
Living in a Very High Fire Hazard Severity Zone, our insurance required a noncombustible roof. The Metal Roof Pros installed a Class A rated standing seam system that satisfied every code requirement. Our premium dropped significantly after we submitted the documentation.
Susan M.
Calabasas, CA
The Metal Roof Pros also handled our attic insulation upgrade when they installed the metal roof. The combination of reflective metal panels and proper insulation cut our summer energy bill by about 20%. The house stays cooler without running the AC as hard.
Robert K.
Agoura Hills, CA
We brought The Metal Roof Pros back for a second commercial project because the first installation was flawless. They understand the unique demands of commercial roofing, including foot traffic paths, equipment mounting, and drainage slopes. Highly recommended for any commercial job.
Maria G.
Sherman Oaks, CA
Our home is near the coast and The Metal Roof Pros recommended aluminum panels instead of steel for our location. The aluminum standing seam system has held up perfectly against the salt air. No corrosion, no discoloration, and the warranty covers us for decades.
James H.
Beverly Hills, CA
The gutter installation by The Metal Roof Pros was just as impressive as the roof work. They used 6-inch seamless aluminum gutters with hidden hangers, and the downspout routing was carefully planned to keep our landscaping protected. Outstanding detail work.
Jennifer L.
Encino, CA
When it came to fire hardening our property, The Metal Roof Pros provided a complete assessment. They installed a noncombustible standing seam roof and sealed every vent and soffit with ember-resistant materials. Our home now meets the latest California wildfire building codes.