Standing Seam Metal Roofing in Orange County

Premium standing seam metal roof installation and repair from the Newport and Laguna coast to inland Irvine and the Santa Ana Mountains canyons. We are the contractors other roofers hire. Now you can hire us directly at wholesale pricing.

15+ Years Experience

CSLB #1234567

12 Cities Served

How Much Does a Standing Seam Metal Roof Cost in Orange County?

A standing seam metal roof in Orange County costs more up front than tile, but it lasts decades longer with almost no maintenance. Because we roll form and install in house, you pay wholesale direct instead of a marked-up price passed down a chain. We measure by satellite and email your quote, so there is no sales appointment to schedule.

The final number depends on roof size, pitch, the number of hips and valleys, and whether existing concrete or clay tile needs removal first. Coastal homes in Newport Beach and Laguna Beach use aluminum, which differs from inland steel pricing. We lay this out clearly before you decide. Call (818) 937-4500 to start.

Why Do Newport Beach and Laguna Beach Homes Need Aluminum Roofing?

Homes along the Orange County coast should use aluminum rather than steel because ocean salt air corrodes ordinary metals. In Newport Beach, Newport Coast, Corona del Mar, and Laguna Beach, we install .032 and .040 aluminum standing seam that will not rust in the daily marine layer and salt spray.

Aluminum keeps its strength where wind off the water and constant humidity would degrade lesser roofs. See our coastal aluminum roofing page for the full picture. Every coastal panel is finished in 70% Kynar 500 PVDF to resist fading and chalking under intense reflected sun off the Pacific.

How Does a Metal Roof Protect Canyon Homes in Coto de Caza and Trabuco Canyon?

A standing seam metal roof gives canyon homes the strongest fire defense available. Our systems carry a Class A fire rating and are non-combustible, so embers driven ahead of a fire cannot ignite the roof. We seal eaves, valleys, and vents against ember intrusion, the way most homes are actually lost.

This is critical in Coto de Caza, Trabuco Canyon, La Habra Heights, and the hills above Irvine, all sitting in the Santa Ana Mountains wildland urban interface. Combining the metal roof with ember-resistant venting brings these Orange County canyon homes in line with current WUI fire expectations.

Do Metal Roofs Keep Inland Orange County Homes Cooler?

Yes. Inland Orange County runs hot through summer, and a reflective metal roof helps keep indoor temperatures down. Our Kynar 500 PVDF finishes reflect a large share of solar energy, and metal releases absorbed heat quickly rather than holding it late into the evening the way heavy tile does.

Homeowners in Irvine, Tustin, Orange, Santa Ana, and Yorba Linda notice this most from July through September. A cool-roof color paired with a ventilated assembly reduces the load on air conditioning and keeps second-floor rooms more comfortable across the hottest part of the year.

Is Standing Seam Metal Better Than Tile for Orange County Homes?

For most Orange County homes, standing seam metal outlasts clay and concrete tile and asks far less of the owner. Tile is heavy, cracks under foot traffic and ground movement, and lets water reach the underlayment sooner than expected. Metal is lighter, seals with hidden clips, and has no loose pieces to slip or shatter in wind.

Metal also meets the full range of county conditions, from coastal salt to canyon fire to inland heat, in a single system. Where tile needs periodic re-bedding and repair, a properly installed standing seam roof largely maintains itself. We can match the profile and color to preserve the Mediterranean look many communities require.

What Panels and Materials Do You Install Across Orange County?

We install standing seam using 22-gauge and 24-gauge steel on inland and canyon homes, and .032 and .040 aluminum on coastal properties where salt air is present. Every panel carries a 70% Kynar 500 PVDF finish, the standard for fade and chalk resistance under strong coastal and inland sun.

We build with Taylor Metals and Sheffield Metals, two manufacturers we trust, and back the work with an 8-year workmanship warranty. That labor warranty runs alongside the manufacturer finish warranty, so both the metal and the installation on your Orange County home are protected.

How Do You Roof Master-Planned and Custom Homes in Irvine and Newport Coast?

We roll form panels on site so they fit the exact roof geometry, which matters on the varied rooflines of Irvine villages and the custom estates of Newport Coast and Coto de Caza. Long clean panel runs, precise hip and valley work, and custom flashing let the metal suit both production and one-off architecture.

Our own crew handles the metalwork throughout, so quality stays consistent whether the home is a Spanish-style tract house or a large contemporary custom build. That control is how we deliver a roof that looks designed for the home rather than added onto it, across Orange County.

How Do You Get a Free Metal Roofing Quote in Orange County?

Getting a quote is simple and hands-off. We measure your roof from satellite imagery, prepare the estimate, and email it to you. There is no salesperson coming out and no pressure to sign. If you have architectural plans for a new build or remodel, you can upload them and we quote directly from those.

Because we install directly rather than routing your job through a middleman, the price you receive is wholesale direct. Call (818) 937-4500 or request a satellite quote online to see what a lifetime standing seam roof costs on your Orange County home.

Which Orange County Cities Do You Install Standing Seam Metal Roofs In?

We serve the following Orange County cities with premium standing seam metal roof installation, coastal aluminum, and wildfire protection. Select your city for local detail.

Newport Beach

Coastal aluminum specialist

Newport Coast

Coastal aluminum specialist

Corona del Mar

Coastal aluminum specialist