Standing Seam Metal Roofing in Los Angeles County

Premium standing seam metal roof installation and repair from the Malibu coast to the San Gabriel Valley. We are the contractors other roofers hire. Now you can hire us directly at wholesale pricing.

15+ Years Experience

CSLB #1234567

36 Cities Served

How Much Does a Standing Seam Metal Roof Cost in Los Angeles County?

A standing seam metal roof in Los Angeles County typically costs more up front than tile, but it lasts far longer and needs almost no upkeep. Because we roll form and install in house, you pay wholesale direct rather than a markup layered on by a middleman. We build your quote from satellite imagery and email it, so there is no sales visit.

Final pricing depends on roof size, pitch, the number of valleys and hips, and whether an old clay or concrete tile roof needs to come off first. Hillside access in areas like Bel Air and Topanga can add labor. We spell all of this out before you commit. Call (818) 937-4500 to get started.

Why Do Coastal Los Angeles Homes in Malibu and Palos Verdes Need Aluminum?

Homes within about a mile of the Los Angeles County coastline should use aluminum, not steel, because salt air corrodes ordinary metals. Along Malibu, Pacific Palisades, Santa Monica, Manhattan Beach, and the Palos Verdes peninsula, we install .032 and .040 aluminum standing seam that simply does not rust in the marine environment.

Aluminum keeps its structural integrity where oceanfront wind uplift and constant moisture would eat through lesser systems. Learn more on our coastal aluminum roofing page. Every coastal panel still carries a 70% Kynar 500 PVDF finish for long-term color and chalk resistance in full sun.

How Does a Metal Roof Protect Hillside Los Angeles County Homes From Wildfire?

A standing seam metal roof gives hillside homes the highest fire protection available. Our systems carry a Class A fire rating and are non-combustible, so wind-driven embers cannot ignite the roof surface. We detail the eaves, valleys, and vents to block ember intrusion, which is how most homes are actually lost in a wildfire.

This matters across the Los Angeles County wildland urban interface: Calabasas, Bel Air, Altadena, La Canada Flintridge, Topanga, Santa Clarita, and the canyons of the Santa Monica Mountains. Pairing the metal roof with ember-resistant venting brings homes in these corridors into line with current WUI building expectations.

Do Metal Roofs Keep San Gabriel Valley Homes Cooler in the Heat?

Yes. Inland Los Angeles County bakes through summer, and a reflective metal roof helps hold indoor temperatures down. Our Kynar 500 PVDF finishes reflect a large share of solar energy, and metal sheds absorbed heat quickly rather than holding it into the evening the way heavy tile does.

Homeowners in Pasadena, Arcadia, San Marino, Encino, Tarzana, and Woodland Hills feel this most in July and August, when cooling bills climb. A cool-roof color paired with a ventilated assembly eases the load on air conditioning and keeps upstairs rooms more comfortable through the hottest stretch of the year.

Is Standing Seam Metal Better Than Tile for Los Angeles County Roofs?

For most Los Angeles County homes, standing seam metal outperforms clay and concrete tile over the life of the roof. Tile is heavy, individual pieces crack under foot traffic or seismic movement, and water reaches the underlayment far sooner than owners expect. Metal is lighter, seals with hidden clips, and has no small pieces to slip or shatter.

Metal also handles the county range of conditions in one system, from coastal salt to hillside fire to valley heat. Where a tile roof needs periodic repair and re-bedding, a properly installed standing seam roof largely takes care of itself. We can match the metal profile and color to keep a tile-era look.

What Panels and Materials Do You Install Across Los Angeles County?

We install standing seam using 22-gauge and 24-gauge steel on inland and hillside homes, and .032 and .040 aluminum on coastal properties where salt air is a factor. Every panel is finished in a 70% Kynar 500 PVDF coating, the standard for fade and chalk resistance under strong California sun.

We build with Taylor Metals and Sheffield Metals, two manufacturers we trust, and back the installation with an 8-year workmanship warranty. That labor warranty sits alongside the manufacturer finish warranty, so both the metal and the way it is installed on your Los Angeles County home are covered.

How Do You Handle Estate and Architectural Roofs in Beverly Hills and Bel Air?

We roll form panels on site so they fit the exact geometry of large or complex roofs, which is essential on the estates of Beverly Hills, Bel Air, Hidden Hills, and Rolling Hills. Long unbroken panel runs, clean hip and valley detailing, and custom flashing let the metal suit ambitious rooflines without seams in the wrong places.

Our own crew does the metalwork from start to finish, so the craftsmanship stays consistent whether the home is Spanish Colonial, Mid-Century Modern, or a sprawling traditional estate. That control is how we deliver a roof that reads as intentional rather than applied, on the architecture Los Angeles County is known for.

How Do You Get a Free Metal Roofing Quote in Los Angeles County?

What Else Do Los Angeles County Homeowners Ask About Metal Roofing?

Yes. We install standing seam metal roofs from the Malibu coastline to the San Gabriel Valley and out to Santa Clarita. That includes Beverly Hills, Pasadena, Calabasas, Palos Verdes, Encino, and every city listed on this page.

It is. Many Spanish Colonial and Mediterranean homes in Los Angeles County carry heavy clay or concrete tile that cracks and lets water through at the underlayment. Standing seam metal weighs far less, seals with hidden clips, and can be color-matched to keep the original look.

Homes within about a mile of the Los Angeles County coast face constant salt air that corrodes most metals. We install .032 and .040 aluminum standing seam there because aluminum does not rust, so it holds up on oceanfront properties in Malibu, Santa Monica, and Palos Verdes.

Yes. Our standing seam systems carry a Class A fire rating, the highest available, and pair with ember-resistant detailing at the eaves and vents. That matters in Calabasas, Bel Air, Altadena, Topanga, and other hillside communities inside the wildland urban interface.

It helps. Inland cities like Pasadena, Arcadia, and San Marino see long stretches of triple-digit heat. Our Kynar 500 PVDF finishes reflect solar energy and the panels shed heat quickly, which eases the load on air conditioning through the summer.

We install 22-gauge and 24-gauge steel standing seam. These heavier gauges resist denting and hold a crisp panel line for decades. On coastal properties we switch to .032 and .040 aluminum instead of steel to defeat salt corrosion.

Our own sheet metal specialist and installation crew build every roof. The metalwork is done in house, not handed off, so the same team that other roofers rely on installs directly on your Los Angeles County home at wholesale pricing.

We offer an 8-year workmanship warranty on installations using Taylor Metals and Sheffield Metals panels. That covers the quality of our labor and detailing, and it sits alongside the manufacturer finish warranty on the Kynar 500 coating.

We build your estimate from satellite imagery and email it to you. There is no salesperson at your door and no pressure. If you have architectural plans, you can upload them and we quote from those instead. Call (818) 937-4500 to start.

Yes. We roll form panels on site and choose from a wide Kynar 500 PVDF color range, so the roof suits Craftsman, Spanish Colonial, and estate architecture common in Pasadena, San Marino, and the older Los Angeles neighborhoods.

Get a Free Metal Roofing Estimate in Los Angeles County

Cut out the middleman. Hire the metal roofing contractors that other Los Angeles County companies hire. We measure by satellite and email your quote, no salesperson required.

Get a Satellite Quote or Upload Plans